2. InStallatIon GUIdE
The Intec colorSplash's EPP Envelope Feeder is designed to operate with the new Intec colorSplash digital production
printers. This guide will show the proper way to prepare the printer for the envelope feeder and installation and operation
of the feeder.
2.1. Preparing the IntEC CS4000 / CS5000 Printer for use your Intec EPP
Envelope Feeder
2.1.1. removing the MPt tray/door
Step 1. To prepare the colorSplash cS4000/
cS5000 printer for the feeder, you must
first remove the door from the manual
feed tray. First, open the manual feed
tray door on the right side of the printer.
2
Step 3. Press inward on the pivot point of the
door on the right side to remove it
from the printer housing.
4
1
Step 2. Press inward on the right side hinge
of the door to release it from the slot.
3
Step 4. Remove the left side of the door in the same
fashion and remove the door from the printer.
5