Canceling Printing; Adding Printers Using Lpd (Tcp/Ip) Protocols; Preparations; Procedure For Adding Printers - Intec CS4000 User Manual

Canceling Printing

Canceling Printing

To cancel data while printing or during print
1
preparation, press the [CANCEL] button on the
control panel.
2
When the [CANCEL] button is pressed, the
following screens will be displayed.
3
To cancel printing, select [Yes], and press the
4
[OK] button.
To continue printing, select [No], and press the
[OK] button.
If no operation is implemented within 3 mins.
while this screen is displayed, the screen display
will disappear and printing will continue.
- 116 -

Adding Printers Using LPD (TCP/IP) Protocols


With Mac OS X environments, you can connect printers using LPD protocols (TCP/IP).
Apple Talk cannot be used with Mac OS X 10.6 or later, so for network connections, connect the printer
using Bonjour (Rendezvous) protocols or LPD protocols (TCP/IP).

Preparations

1
Check that the IP address, subnet
mask, and router address, etc., have
been set correctly for the desired Mac
OS, and that you are connected to the
network using LPD protocols (TCP/IP).
2
Download the PPD installer for Mac OS
X for the printer to be connected from
the Intec Printing Solutions homepage
(http://www.intecprinters.com), unzip
and start the PPF installer, and then
install PPD on the relevant Mac OS. This
step is unnecessary if PPD is already
installed.
3
Set the IP address, subnet mask, and
gateway address, etc., on the printer to
be connected. Make sure the printer is
turned ON, and connected to the TCP/
IP network environment.
Adding Printers Using LPD (TCP/IP) Protocols
Procedure for Adding
Printers
1
Open the Mac OS system environment
settings, and click the "Print & Scan"
icon to open the "Print & Scan" screen.
2
Click the [+] button to open the "Add
printer" screen.
- 117 -
1
2
3
4