Intec CS4000 User Manual page 20

Installing the Device
 Front view (with expansion trays mounted)
1
400mm
2
1560mm
3
4
 Installation Precautions
WARNING
Do not install close to high-temperature locations
or naked fl ames.
Do not install in locations where chemical
reactions occur (e.g., laboratories).
Do not install close to combustible solutions such
as alcohol or thinners, etc.
Do not install within reach of small children.
Do not install in an unstable location (e.g.,
unsteady tables or sloping locations, etc.)
Do not install in humid or dusty locations, or in
locations in direct sunlight.
Do not install in environments with salt air or
corrosive gas.
Do not install in locations with major vibration.
Do not install in locations where the device air
holes are blocked. Use the following illustrations
to check the air hole position.
Front
Back Left
- 34 -
Do not install directly on shaggy rugs or carpets.
Do not install in locations with poor air circulation
or ventilation such as sealed rooms, etc.
Make sure of ventilation if using continuously for
long hours in a small room.
Install away from strong magnetic fi elds and
sources of noise.
Install away from monitors and TVs.
When moving the device, hold the carrying lever
and carrying handles.
The main device weight is approx. 97kg* for
model CS4000 and approx. 110kg* for model
CS5000. When lifting or moving the device, make
sure to use at least 4 people.
Make sure of the ventilation if printing large
quantities or using the device continuously for
long hours.
*: Includes consumables such as image drums and toner
cartridges, etc.
Top
Right
side
CAUTION
- 35 -
Installing the Device
1
2
3
4