Intec CS4000 User Manual page 38

Connecting the PC
5
Check that [Network Setup] has been
selected, and press the [OK] button.
1
Admin Setup 1/2 Page
�
Network Setup
�
USB Setup
�
Print Setup
�
PS Setup
�
PCL Setup
Use Online button to return to standby screen
2
6
Press the scroll button several times
to select [EtherTalk], and then click the
[OK] button.
Network Setup 1/1 Page
1
TCP/IP
2
NetBIOS over TCP
3
3
EtherTalk
4
IP Address Set
5
IPv4 Address
6
Subnet Mask
Use Online button to return to standby screen
7
Press the scroll button to select
[Enable], and then press the [OK]
4
button.
Network Setup Network Setup EtherTalk 1/1 Page
1 1 1
TCP/IP TCP/IP Enable
2 2 2
NetBIOS over TCP NetBIOS over TCP Disable
3 3
EtherTalk EtherTalk
4 4
IP Address Set IP Address Set
5 5
IPv4 Address IPv4 Address
6 6
Subnet Mask Subnet Mask
Use Online button Use Online button to return to standby screen Use Online button to return
8
Press the [BACK] button to display the
"Network Setup" screen.
Network Setup 1/2 Page
1
TCP/IP
2
NetBIOS over TCP
3
EtherTalk
4
IP Address Set
5
IPv4 Address
6
Subnet Mask
Use Online button to return to standby screen
9
Press the [BACK] button to display the
[Admin Setup] screen.
Admin Setup 1/2 Page
�
Network Setup
�
USB Setup
�
Print Setup
�
PS Setup
�
PCL Setup
Use Online button to return to standby screen
10
Press the scroll button several times
to select [Power Setup], and then click
the [OK] button.
11
Press the scroll button to select
[Sleep], and then click the [OK] button.
12
Press the scroll button to select
[Disable], and then click the [OK]
button.
- 70 -
13
Press the [ON LINE] button to return to
the standby screen.
Connecting the PC
 Installing the printer drivers on the computer
1
Check that the device and PC are
connected, and that the power supply is
turned ON.
Reference
"Connecting Using LAN Cables" (P.57)
2
Insert the "Software DVD-ROM" into the
PC.
3
Double-click the Intec icon on the
desktop.
4
Double-click [Driver]> [Installer for Mac
OS X].
5
Enter the Mac OS X administrator
password, and click [Install Software].
Finish the installation by following the
instructions displayed on the screen.
6
Select [System Preferences] from the
Apple menu.
7
Click [Print & Scan].
8
Click [+].
9
Click [AppleTalk].
- 71 -
1
2
3
4