If Setup Fails; Installing Printer Drivers (Macintosh); Network Connections - Intec CS4000 User Manual

Connecting the PC
14
Check that the Intec CS5000 icon is
displayed.
Right-click the Intec CS5000 icon and
1
select and item from the menu, and
check that all the printer drivers that
have been installed are displayed in the
sub-menu.
2
15
Remove the "Software DVD-ROM" from
the PC.
3
Reference
For how to print from the PC, see "Printing from Trays"
(P.89).

If Setup Fails

If setup fails using either a network or USB
4
connection, see the enclosed "Troubleshooting/
Daily Maintenance Manual".
This manual explains the possible causes of the
setup trouble and the countermeasures.
Installing Printer Drivers
(Macintosh)

Network Connections

To connect Mac OS X and the device via a
network, install the printer drivers on the
computer, and then set the device as a network
printer.
 Deciding the Print Method
(Protocol)
There are two printing methods from Mac OS X:
Using EtherTalk, and using Bonjour/Rendezvous.
Print method
Features
(Protocol)
EtherTalk Uses functions mounted
as standard to OS X
10.5,
Bonjour Use this with TCP/IP
Rendezvous networks.
- 68 -
 Setup Flow
The setup procedure may differ depending on
the print method.
Bonjour/
EtherTalk
Rendezvous
Turning ON the power Turning ON the power
supply supply
Enabling the device
EtherTalk
Disabling device sleep
mode
Turning ON the PC power Turning ON the PC power
supply supply
Setting EtherTalk in the
PC
Installing the printer Installing the printer
drivers drivers
Adding devices to the PC Adding devices to the PC
Go to "Using EtherTalk". Go to "Using Bonjour
(Rendezvous)" (P.72).
Note
Upgrading the Mac OS X or printer driver version may
result in differences from the description in the manual.
Disable all anti-virus software before starting the setup.
Connecting the PC
 Using EtherTalk
 Enable EtherTalk using the control panel,
and disable sleep mode
If connecting to a network using EtherTalk, it
is necessary to enable EtherTalk in the printer,
and disable sleep mode. Next, install the printer
drivers in the computer.
Reference
People using Bonjour go to "Using Bonjour (Rendezvous)"
(P.72).
1
Press either the scroll button
on the control panel to display the
"Functions" screen.
2
Press the scroll button several times
to select [Admin Setup], and then press
the [OK] button.
3
Use the 10-key pad to enter the
administrator password.
The default factory-set password is
"aaaaaa". Press the [OK] button after
entering each individual character.
4
Press the [OK] button.
- 69 -
1
2
or
3
4