Setting Paper - Intec CS4000 User Manual

Installing the Device
3
Place the image drum that has been
removed onto a fl at surface covered
with paper, and remove 4 stoppers
1
(orange) in the direction of the arrows.
2
3
4
4
Align the (red) arrow labels on the
image drum with the arrows on the
device, and gently insert into the slot
and push in fi rmly all the way while
being careful not to touch the green
cylinder with your hands.
Note
Be careful not to touch or scratch the image drum
(green cylinder).
5
Close the front cover.
Reference
Model CS5000 requires the Spot Color kit to be set. For
details, see the "Separate Volume Spot Color Guide".
- 40 -

Setting Paper

This section explains how to set the paper in tray
1 or trays 2/3/4/5.
Memo
In this section, setting paper in tray 1 is used as an
example. Set trays 2 to 5 using the same procedure.
1
Pull out the tray 1 paper cassette (
2
Slide the paper guide ( ) and paper
stopper ( ) to align to the size of the
paper that has been set.
3
Thoroughly sort the paper. Carefully
align the edges of the paper
horizontally.
Installing the Device
4
Set the paper with the print surface
face-down.
).
Note
Do not exceed the " " symbol ( ) on the paper
guide when setting the paper.
Memo
Set so there is no gap between the paper and the
paper guide or paper stopper.
5
Use the paper guide to secure the
paper.
6
Return the paper cassette to the tray.
- 41 -
1
2
3
4