Connecting the PC
12
Remove the "Software DVD-ROM" from
the PC.
1
Reference
For how to print from the PC, see
"Printing from Trays"
(P.89).
If Setup Fails
If setup fails using either a network or USB
connection, see the enclosed "Troubleshooting/
2
Daily Maintenance Manual".
This manual explains the possible causes of the
setup trouble and the countermeasures.
3
4
Adding Options
Use the following procedure to set the printer
drivers if an optional expansion unit or built-in
HDD have been mounted to the device.
Windows PS Printer Drivers
1
Click [Start], and select [Devices and
Printers].
2
Right-click the Intec CS5000 icon,
and select [Printer properties]. ([Intec
CS5000(PS)] if installing multiple
printer drivers.)
3
Select the [Device Settings] tab.
Adding an Expansion Tray Unit
4
If using a network connection, click
[Get installed options automatically] in
[Installable Options].
If using a USB connection, enter the
number of trays minus the multi-
purpose tray in [Available Trays].
For example, if three expansion trays
are mounted, the usable trays are trays
1/2/3/4, so enter "4".
- 76 -
Adding the Built-in HDD
4
If using a network connection, click
[Get installed options automatically] in
[Installable Options].
If using a USB connection, select
[Installed] in [Hard Disk].
5
Click [OK].
Connecting the PC
Windows PCL Printer Drivers
1
Click [Start], and select [Devices and
Printers].
2
Right-click the Intec CS5000 icon,
and select [Printer properties]. ([Intec
CS5000(PCL6)] if installing multiple
printer drivers.)
3
Select the [Device Options] tab.
Adding an Expansion Tray Unit
4
If using a network connection, click [Get
Printer Settings].
If using a USB connection, enter the
number of trays minus the multi-
purpose tray in [Installed Paper Trays].
For example, if three expansion trays
are mounted, the usable trays are trays
1/2/3/4, so enter "4".
- 77 -
1
2
3
4