Setup To Turn Off The Power Supply Automatically; Setting Auto Power Off Mode; Setting The Time Before The Printer Enters Auto Power Off Mode - Intec CS4000 User Manual

Setup to Turn OFF the Power Supply Automatically

Setup to Turn OFF the Power Supply Automatically

1
Setting auto power OFF
mode
The device can be set to enter OFF mode
automatically when no printing or data has been
received after a fi xed period of time.
2 In the default factory settings, auto power OFF
mode is set automatically. Set according to the
conditions for entering OFF mode.
"Enable": Enters OFF mode automatically
"Auto Confi g": Enters OFF mode when the set time has
elapsed. If using a network connection,
however, OFF mode is not entered even
when the set time has elapsed.
3
"Disable": The power supply does not turn OFF
automatically.
1
Press the scroll button or .
4
2
Select [Admin Setup], and press the
[OK] button.
3
Enter the administrator password, and
press the [OK] button.
Memo
 In the default factory settings, the administrator
password is [aaaaaa].
4
Select [Power Setup], and press the
[OK] button.
5
Select [Auto Power Off], and press the
[OK] button.
6
Select [Enable] or [Auto Confi g], and
press the [OK] button.
- 112 -
7
Press the [ON LINE] button to return to
the standby screen.
Memo
 Other items can also continue to be set before
pressing the [ON LINE] button.
Setup to Turn OFF the Power Supply Automatically
Setting the time before the printer
enters Auto Power Off mode
You can set the time until OFF mode is entered.
The default factory setting is "4 hours".
1
Press the [Fn] key.
The numerical values input screen will
be displayed.
2
Enter [2], [0], [2], and press the [OK]
button.
3
Select the time to be set, and press the
[OK] button.
4
Press the [ON LINE] button to return to
the standby screen.
Memo
 The settable times are described below.
1 hour, 2 hours, 3 hours, 4 hours, 8 hours, 12 hours,
18 hours, 24 hours
- 113 -
1
2
3
4