Usb Connections - Intec CS4000 User Manual

Connecting the PC

USB Connections

Note
1
Check that the device power supply is turned OFF.
Setup requires computer administrator privileges.
This section described the operating procedure for
Windows 7 unless otherwise specifi ed. The screens and
operating procedure may differ depending on the OS.
 Setup Flow
2
Turning ON the PC power supply
Installing the printer drivers
Turning ON the device power supply
3
1
Turn ON the PC power supply to start
Windows.
Memo
When the device power supply is turned ON, the
"Add new software wizard" may be displayed in the
4
screen. If this happens, click "CANCEL", and then
turn OFF the device beore proceeding to the next
step.
2
Insert the "Software DVD-ROM" into the
PC.
3
When the "AutoPlay" window is
displayed, click [Run Setup.exe].
4
When the "User Account Control"
window is displayed, click [Yes].
5
Read the "Software License Agreement",
and click "Agree".
6
Read the "Environmental advice for
Users", and click [Next].
7
Select the printer model to be used,
and click [Next].
8
Select "USB connection", and click
[Next].
- 66 -
9
Click [Recommended Install] to start
the installation.
Memo
Click [Custom install] to select "PCL6 Driver".
10
When the following screen is displayed
during the installation, connect the
device and PC using a USB cable, and
then turn ON the device power supply.
Memo
If the display does not change even when the device
is connected, click [Install using another port].
Select the port to which the device is connected
using the "Printer port" screen, and click [Next].
Connecting the PC
11
When the installation has fi nished, click
[Exit].
12
In the menu screen, click [Exit]> [Yes].
13
Select [Start]> [Devices and Printers].
- 67 -
1
2
3
4