Printing from Trays
Printing from Trays
With the exception of some paper sizes, the printer automatically detects the size of paper set in trays
1
1 to 5
. Further, only the width of the paper size is automatically detected.
*
*: Trays 2 to 5 are optional.
Memo
The printer does not automatically detect the following paper sizes.
- A3NOBI, tabloid extra, A3WIDE, 13×18"
-A5, A6
-postcards, Japanese double postcards
2
-legal13.5, legal14
-custom
If the printer does not detect automatically, use the control panel to set the paper size. For details, see
the Control Panel"
(P.92).
Set 13x18" as custom size.
Setting Paper in Trays 1 to 5
3
This section explains how to set paper in tray 1
or trays 2/3/4/5.
Memo
In this section, setting paper in tray 1 is used as an
example. Set trays 2 to 5 using the same procedure.
1
Pull out the tray 1 paper cassette (
4
"Setting Paper Using
2
Slide the paper guide (
) and paper
stopper (
) to align to the size of the
paper that has been set.
).
3
Thoroughly sort the paper. Carefully
align the ends of the paper horizontally.
- 88 -
4
Set the paper with the print surface
face-down.
Note
Do not exceed the " " symbol (
) on the paper
guide when setting the paper.
Memo
Set so there is no gap between the paper and the
paper guide or paper stopper.
5
Use the paper guide to secure the
paper.
6
Return the paper cassette to the tray.
Printing from Trays
Printing from Trays
Open the fi le to be printed on the PC, and
select [Paper Size], [Paper Source], and [Media
Weight] to print via the paper driver.
This section explains how to print using "Tray 1"
or " Auto" from the following printer drivers.
Windows PS printer driver
Windows PCL printer driver (P.90)
Mac OS X printer driver (P.91)
Further, this explanation uses "WordPad" for
Windows as the application used. For Mac OS X,
the example uses "TextEdit".
Reference
For how to install the printer drivers, see
"Connecting the
PC"
(P.55).
For how to print from the multi-purpose tray, see
from the Multi-Purpose Tray"
(P.92).
Memo
Select [Auto] in [Paper Source] to automatically select the
tray holding the designated paper.
Using Windows PS Printer Drivers
1
Open the fi le to be printed using
WordPad.
2
Click [Page Setup] in the [File] menu.
3
Select the paper size and print
orientation, and click [OK].
4
Click [Print] in the [File] menu.
5
Click [Advanced] (or [Preferences]).
- 89 -
1
2
3
"Printing
4