Printer Information; Connecting The Pc; Flow For Installing Drivers On A Pc - Intec CS4000 User Manual

Test Printing Using the Printer Only

Printer Information

During test printing, the following device setup
1
details (printer information) will be printed.
Memo
Use the printer information to check the functions that
are currently usable, the settings table, the software and
hardware versions built into the device, and the print
quantity, etc.
Note
2
The printer information described here is a sample. The
printer information printed by your device may differ in
places.
3
Check here if an option
(expansion tray unit or
built-in HDD) is
mounted.
4
Reference
You can also print function reports and demo pages, etc.
For details, see "Advanced".
- 54 -

Connecting the PC

This section explains how to connect the device to a PC, and how to install the printer drivers from the
enclosed "Software DVD-ROM". Prepare a PC connected to a DVD drive.

Flow for Installing Drivers on a PC

Connecting to PC
For Windows
Connecting via a
Connecting via USB
network
Turning ON the device
power supply
Setting the IP address Enabling the device
in the device
Disabling device sleep
Connecting the cables
Turning ON the PC power supply
Setting the IP
Setting EtherTalk in
address, etc., in the
PC
Installing the printer drivers
Turning ON the device
power supply
Checking operations from the PC
(See "3.Printing")
Connecting the PC
For Macintosh
Connecting via a network
Connecting via USB
Connecting via Connecting via
EtherTalk Bonjour/Rendezvous
Connecting the cables
Turning ON the device power supply
EtherTalk
mode
the PC
Adding devices to the PC
- 55 -
1
2
3
4