Setting Up; Installing The Device; Installation Conditions - Intec CS4000 User Manual

This chapter explains the methods for setting up the device, and for connecting the device to a PC and
installing the printer drivers.
Note
Customers who have purchased CS5000 should also see the "Separate Volume Spot Color Guide".
Reference
See the "Fiery XF for Intec Quick Start Guide" for the methods of setting up the color management server.

Installing the Device

For safe and pleasant use of the device, install in a location that satisfi ed the "installation environment"
and "installation space" described in the "installation conditions". Further, the conditions also describe
the installation precautions. Make sure to read them before use.

Installation Conditions

Consider the following environmental conditions
before selecting the device installation location.
 Installation Environment
Use in a location where temperature and
humidity are within the following ranges.
Ambient 10ºC to 32ºC
temperature:
Ambient 20% to 80%RH (relative humidity)
humidity:
Max. wet-bulb 25ºC
temperature:
Memo
Make sure there is no condensation.
If installing in a location where the ambient humidity is
30% or less, use a humidifi er or static prevention mat.

2. Setting Up

- 33 -
 Installation Space
Make sure the area around the device has
the following space, and select a location that
can support the weight of the device before
installing. (The main unit weights are as follows:
CS4000: Approx. 97kg*, CS5000: Approx.
110kg*.)
*: Includes consumables such as image drums and toner
cartridges, etc.
 Plane view
1770mm
620mm
1420mm
600mm
 Front view
Installing the Device
200mm
460mm
400mm
1040mm
1
2
3
4