Pcie3 Lp 2-Port 100 Gb Edr Infiniband Adapter (Fc Ec3E And Ec3F; Ccin 2Cea) - IBM Power System S822LC Installing The System And Ordered Parts

– The latest version of the device driver or iprutils can be downloaded from the IBM Service and
Productivity Tools website(http://www14.software.ibm.com/webapp/set2/sas/f/lopdiags/
home.html).
v Supported on Firmware level 8.1

PCIe3 LP 2-port 100 Gb EDR InfiniBand Adapter (FC EC3E and EC3F; CCIN 2CEA)

Learn about the specifications and operating system requirements for the feature code (FC) EC3E adapter.
Overview
FC EC3E and EC3F are both the same adapter with different feature codes. FC EC3E is a low-profile
adapter and FC EC3F is a full-height adapter.
The PCIe3 2-port 100 Gb enhanced data rate (EDR) InfiniBand adapter provides high-speed connectivity
with other servers or InfiniBand switches. Each port maximum of 100 Gb assumes that no other system
and or switch bottlenecks are present.
Note:
v The ambient environment must be less than or equal to 25°C (Celsius) and 500 M (meters) when using
12x LFF (large form factor) HDDs (hard disk drives) in the 8348-21C.
v For no ambient restrictions in the 8348-21C, keep at least two of three bays empty of LFF HDDs in the
leftmost drive column.
Figure 49. PCIe Gen3 low profile x16 2-port EDR InfiniBand adapter
Specifications
Item Description
Adapter FRU number
00WT075 (Designed to comply with RoHS requirement.)
50
Installing the System and Ordered Parts for the 8335-GCA or 8335-GTA