Figure 52. CAPI Compression Accelerator Adapter (Full-height)
Specifications
Item
Description
Adapter FRU number
00WT173 (Designed to comply with RoHS requirement)
I/O bus architecture
PCIe3 x8
Slot requirement
One PCIe x8 or x16 CAPI enabled slot per adapter
Supported Systems
®
POWER8
processor-based server
v 8247-21L, 8247-22L, and 8247-42L
v 8335-GCA and 8335-GTA
v 8348-21C
Voltage
12 V
Form factor
Short, with full-height tailstock (FC EJ1A)
Short, low-profile (FC EJ1B)
Maximum number
For details about the maximum number of adapters that are supported, see PCIe adapter
placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER8/
p8eab/p8eab_mtm_pciplacement.htm) and select the system you are working on.
Attributes provided
High throughput compression that saves storage and I/O bandwidth with little or no overhead
CPU offload and CAPI interface with negligible software load frees up CPU cores for higher
value computation or licensed software
Lower power consumption by offloading the CPU intensive compression to an FPGA
56
Installing the System and Ordered Parts for the 8335-GCA or 8335-GTA