IBM Power System S822LC Installing The System And Ordered Parts page 86

v 4-Port machine access code (MAC)
v High performance IPV4/IPV6 checksum offload
v Large Send and Large Receive Support
v Multiple Queues
v VIOS
The following figure shows the adapter.
Figure 57. Adapter
Adapter LED states
The LEDs on the adapter provide information about the operation status of the adapter. The LEDs are
visible through the mounting bracket. Figure 57 shows the location of the LEDs. Table 15 describes the
different LED states and what those states indicate.
Table 15. Adapter LEDs and descriptions
LED
Link/Speed
Activity
Operating system or partition requirements
This adapter is supported for the following versions of operating systems:
v Linux
– Bare Metal Systems (Not supported)
– PowerKVM 3.1 Systems or PowerKVM 2.1 (Not Supported)
70
Installing the System and Ordered Parts for the 8335-GCA or 8335-GTA
Light
Yellow
Green
Green flashing
Off
Description
10 Mbps or 100 Mbps
1000 Mbps or 1 Gbps
Active link or data activity
No link
The absence of a link can indicate a defective cable,
defective connector, or a configuration mismatch.