IBM Power System S822LC Installing The System And Ordered Parts page 60

v 64-bit kernel environments
v multi-processor safe
v AIX Common Data Link Interface (CDLI) compliant
v Concurrent operation of NIC and RoCE device drivers while sharing the same physical port
v Standard frames (1518 bytes + 4 bytes for VLAN tag)
v Jumbo frames (9018 bytes + 4 bytes for VLAN tag)
v IPV4 or IPV6 transmit/receive TCP checksum offload
v IPV4 transmit TCP segmentation offload (commonly known as large send)
v IPV4 receive TCP segmentation aggregation (commonly known as large receive)
v Enhanced Error Handling (EEH) from PCI bus errors
Figure 45 shows the adapter.
Figure 45. FC EC3A adapter
Specifications
Item Description
Adapter FRU number
00FW105 (Designed to comply with RoHS requirement)
I/O bus architecture
PCIe3 x8
Slot requirement
For details about slot priorities and placement rules, see PCIe adapter placement rules and slot
priorities (http://www.ibm.com/support/knowledgecenter/POWER8/p8eab/
p8eab_mtm_pciplacement.htm) and select the system you are working on.
Cables
See "Cables" on page 45 for details.
Voltage
3.3 V
Form factor
Short
Maximum number
For details about the maximum number of adapters that are supported, see PCIe adapter
44
Installing the System and Ordered Parts for the 8335-GCA or 8335-GTA