Figure 3. Opening the front latch
4. At the front of the rack, insert three pins on the front of the rail into the holes within the selected EIA
unit that were previously marked. Lower the slide rail down (1) to engage the hook feature on the
middle pin. For details, see Figure 4.
Figure 4. Pins that are seated on the front rail of the rack
5. While you pull the slide rail forward, ensure that all three pins protrude through the rack holes, then
push the front latch (2) all the way in. For details, see Figure 5 on page 6.
Installing the IBM Power System S822LC (8335-GTA and 8335-GCA)
5