IBM Power System S822LC Installing The System And Ordered Parts page 88

v Supports TCP segmentation or large send offload
v Supports EEPROM-SPI and single EEPROM
v Supports interrupt levels INTA and MSI
v Hardware certifications FCC B, UL, CE, VCCI, BSMI, CTICK, MIC
v Network Controller (MAC) Intel 82571EB
v Compliant with European Union Directive 2002/95/EC on the Restriction of the Use of Certain
Hazardous Substances in Electrical and Electronic Equipment
Specifications
Item Description
Adapter FRU number
74Y4064 (Designed to comply with RoHS requirement)
Wrap plug
10N7405
I/O bus architecture
PCIe2.0, x4
Slot requirement
One PCIe x4 slot.
Cables
4-pair, CAT5e, UTP cables are connected to copper RJ45 connectors.
Voltage
3.3 V
Form factor
Short, full-height
Maximum number
For details about the maximum number of adapters that are supported, see PCIe adapter
placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER8/
p8eab/p8eab_mtm_pciplacement.htm) and select the system you are working on.
Connector information
v Two RJ-45 ports
v Two LED adapter status indicators per port, for link activity and speed
Attributes provided
v PCIe x4, generation 1 or generation 2
v 4-Port machine access code (MAC)
v High performance IPV4/IPV6 checksum offload
v Large Send and Large Receive Support
v Multiple Queues
v VIOS
The following figure shows the adapter.
72
Installing the System and Ordered Parts for the 8335-GCA or 8335-GTA