IBM Power System S822LC Installing The System And Ordered Parts page 58

Hide thumbs Also See for Power System S822LC:
Table of Contents

Advertisement

The following figure shows the adapter.
Figure 44. Adapter
Adapter LED states
The LEDs on the adapter provide information about the operation status of the adapter. The LEDs are
visible through the mounting bracket. Figure 44 shows the location of the LEDs. Table 9 describes the
different LED states and what those states indicate.
Table 9. Adapter LEDs and descriptions
LED
Link/Speed
Activity
Operating system or partition requirements
This adapter is supported for the following versions of operating systems:
v AIX
– AIX Version 7.1 with the 7100-01 Technology Level and Service Pack 4, or later.
– AIX Version 7.1 with the 7100-00 Technology Level and Service Pack 6, or later.
– AIX Version 6.1 with the 6100-07 Technology Level, and Service Pack 4, or later.
– AIX Version 6.1 with the 6100-06 Technology Level, and Service Pack 8, or later.
– AIX Version 5.3 with the 5300-12 Technology Level and Service Pack 6, or later.
v Linux
– Red Hat Enterprise Linux 6.2, or later.
42
Installing the System and Ordered Parts for the 8335-GCA or 8335-GTA
Light
Yellow
Green
Green flashing
Off
Description
10 Mbps or 100 Mbps
1000 Mbps or 1 Gbps
Active link or data activity
No link
The absence of a link can indicate a defective cable,
defective connector, or a configuration mismatch.

Advertisement

Table of Contents
loading

This manual is also suitable for:

8335-gca8335-gta

Table of Contents