Install The Left And Right Down Hoses - Raven AutoBoom Installation Manual

8. Connect the straight end of the installed hydraulic hose to the fitting installed in Port LC of the AutoBoom
valve.

INSTALL THE LEFT AND RIGHT DOWN HOSES

FIGURE 5. Left and Right Down Hoses Installed
1. Disconnect the machine's left and right cylinder return hoses from the machine's hydraulic valve.
2. Install tee adapter fittings in the open ports.
3. Connect the machine's right cylinder return hose to the opposite end of the tee fitting installed in the right
return port.
4. Install the 90° end of the supplied hydraulic hose on the 90° end of the installed tee fitting.
5. Connect the straight end of the installed hydraulic hose to the fitting installed in the RT CYL RTN Port of the
AutoBoom valve.
6. Connect the machine's left cylinder return hose to the opposite end of the tee fitting installed in the left return
port.
7. Install the 90° end of the supplied hydraulic hose on the 90° end of the installed tee fitting.
8. Connect the straight end of the installed hydraulic hose to the installed fitting in the LF CYL RTN Port of the
AutoBoom valve.
Manual No. 016-0230-114 Rev A
ULTRAGLIDE
11