ETC ColorSource CYC Installation Manual

ETC ColorSource CYC Installation Manual

Hide thumbs Also See for ColorSource CYC:

Advertisement

ETC Installation Guide
ColorSource
Overview
The ColorSource CYC is an affordable LED fixture that uses the RGBI-L (red,
green, blue, indigo, and lime) color system to provide a rich, bright light.
Safety
Read the entire manual before using this equipment.
CAUTION: • Risk of eye injury. Do not stare directly into the light.
WARNING:
®
CYC v1.6
Note: Features described in this document require the latest
version of software. For information on updating fixture
software, see
• Do not operate in proximity to flammable materials.
Disconnect the fixture from power and DMX and allow
it to cool before performing any cleaning and
maintenance.
Corporate Headquarters
Service (Americas)
London, UK
Tel +44 (0)20 8896 1000
Rome, IT
Tel +39 (06) 32 111 683
Holzkirchen, DE
Tel +49 (80 24) 47 00-0
Hong Kong
Tel +852 2799 1220
Web:
etcconnect.com
specifications subject to change.
US Patents 8,384,294 . 8,403,523 . 8,593,074 . 8,633,649 . 8,723,450 . 8,878,455 . 9,041,308
EU Patents 2638781 . 6020110157302
7415M2100-1.6
Rev A
Updating the fixture software
Middleton, Wisconsin, USA
service@etcconnect.com
Service: (UK)
Service: (UK)
Service: (DE)
Service: (Asia)
© 2017 Electronic Theatre Controls, Inc.
ETC intends this document to be provided in its entirety.
All other patents pending.
Released 2017-10
on
page
Tel +608 831 4116
service@etceurope.com
service@etceurope.com
techserv-hoki@etcconnect.com
service@etcasia.com
Product information and
9.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ColorSource CYC and is the answer not in the manual?

Questions and answers

Summary of Contents for ETC ColorSource CYC

  • Page 1 ColorSource CYC v1.6 Overview The ColorSource CYC is an affordable LED fixture that uses the RGBI-L (red, green, blue, indigo, and lime) color system to provide a rich, bright light. Note: Features described in this document require the latest version of software. For information on updating fixture...
  • Page 2: Typical Power Consumption

    ETC Installation Guide ColorSource CYC v1.6 Environment The ColorSource CYC operates in ambient temperatures of 0°C–40°C. Note: The ColorSource CYC is for indoor use only. Note: • Maximum recommended ambient operating temperature: Ta = 40°C (104°F) • Maximum anticipated external surface temperature at 40°C ambient: Tmax = 110°C (230°F)
  • Page 3: Installation

    RJ45 connectors for data in and thru Conversion cables are available from ETC. Please contact your ETC customer service representative and request part number W6538 for RJ45 to female XLR or part number W6539 for RJ45 to male XLR.
  • Page 4: Setting Up The Fixture

    ETC Installation Guide ColorSource CYC v1.6 Setting up the fixture Plug power cord into the powerCON In connector on the rear of the fixture. Make any power-thru cable connections prior to applying a power source. Make any DMX connections, and if the fixture is the last in a DMX line,...
  • Page 5: User Interface

    ETC Installation Guide ColorSource CYC v1.6 User interface The user interface allows you to set the start address of the fixture, access the stand-alone presets and sequences, and set the DMX control mode. • The DMX address will blink when no DMX is present and a preset or sequence is not active.
  • Page 6: Changing The Dmx Control Mode

    DMX control mode will not be saved. This cancels unsaved changes.  Note: Direct mode ( ) on the ColorSource CYC is not a calibrated mode. As a result, you may see discrepancies in color between fixtures. ETC recommends operating in one of the calibrated modes.
  • Page 7: Setting Presets And Sequences

    ETC Installation Guide ColorSource CYC v1.6 Setting presets and sequences There are twelve factory-configured presets followed by five factory- configured sequences built into the fixture. From the Preset/Sequence menu, press the Up and Down buttons to scroll through the list. The sequence or preset plays immediately upon selection.
  • Page 8: Pre-Configured Presets

    ETC Installation Guide ColorSource CYC v1.6 Pre-configured presets Preset Name Preset Name 3200K White Magenta 5600K White Yellow Orange Green Light Yellow Blue Light Blue Cyan Light Pink Pre-configured sequences Sequence Name Rainbow Fast Rainbow Slow Warm Colors Fast Cool Colors Fast...
  • Page 9: Locking The User Interface

    To unlock the user interface, press and hold the Up and Down buttons simultaneously for 3 seconds. Updating the fixture software ETC recommends using UpdaterAtor software to manage software updates. UpdaterAtor Software Quick For more information on UpdaterAtor, see the Guide , which you can download for free from etcconnect.com.
  • Page 10: Error Codes

     • : Screen toggles between to indicate a problem with the color calibration. The fixture will need to be returned to the ETC factory; contact your local dealer to set up a repair.    • : Screen toggles between...
  • Page 11 ETC Installation Guide ColorSource CYC v1.6 ColorSource CYC v1.6 Page 11 of 12...
  • Page 12: Quick Reference

     • : Screen toggles between to indicate a problem with the color calibration. The fixture will need to be returned to the ETC factory; contact your local dealer to set up a repair.    • : Screen toggles between...

Table of Contents