Table of Contents
Advertisement
The MVS900 Series is convenient for your various hardware configurations, including the CPU
(Central Processing Unit), memory module, HDD (Hard Disk Drive) and PCIe/PCI card.
Section 2 will show you how to install the hardware.
2.1
Installing the Processor
®
The Intel
Core™ i7/i5/i3 processors are available as a boxed processor for the MVS900
system. Intel recommends the processors should be installed by a qualified computer
professional since this electronic device may cause serious damage to the installer, system
and processor if installed improperly.
Important Notes Before attempting to install a new processor, carefully review the documentation
that came with your system and make sure that you will not be voiding your warranty by opening
the computer or replacing your processor.
Instructions:
1.
Make sure that your system can accommodate the Intel
processors that you want to install. Check for CPU Card, BIOS, and thermal compatibility
by using the manufacturer's documentation for the system, or by contacting the vendor if
necessary. The processor should only be installed in systems supporting the Intel
®
i7/i5/i3/Celeron
2.
Obtain access to your processor socket as described in the documentation for your
system.
3.
If the cooling solution prevents you from accessing the processor socket, you may need
to remove it. Instructions on how to remove your cooling solution should be provided in
the documentation that came with the system.
Hardware Installation
Hardware Installation
processors.
MVS900-511/512-FL
Section 2
®
Core™ i7/i5/i3/Celeron
®
Core
®
™
23
Advertisement
Table of Contents
Need help?
Do you have a question about the MVS900-511-FL Series and is the answer not in the manual?
Questions and answers