Download
Share
Print this page
  1. Manuals
  2. Brands
  3. AXIOMTEK Manuals
  4. Desktop
  5. MPC152-845
  6. User manual

AXIOMTEK MPC152-845 User Manual

All-in-one 15” xga tft fanless touch panel computer with intel celeron processor n3060 onboard
Hide thumbs

Advertisement

Quick Links

Download this manual
MPC152-845
All-in-One
15" XGA TFT Fanless Touch Panel
Computer
with
Intel®
Celeron®
Processor N3060 onboard
User's Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the MPC152-845 and is the answer not in the manual?

Questions and answers

Related Manuals for AXIOMTEK MPC152-845

Summary of Contents for AXIOMTEK MPC152-845

  • Page 1 MPC152-845 All-in-One 15” XGA TFT Fanless Touch Panel Computer with Intel® Celeron® Processor N3060 onboard User’s Manual...
  • Page 2 Axiomtek does not make any commitment to update the information in this manual. Axiomtek reserves the right to change or revise this document and/or product at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Axiomtek Co., Ltd.

  • Page 3: Safety Precautions

    Most electronic components are sensitive to static electrical charge. Disconnect the power cords from the MPC152-845 Series before making any installation. Be sure both the system and the external devices are turned OFF. Sudden surge of power could ruin sensitive components. Make sure the MPC152-845 Series is properly grounded.

  • Page 4: Table Of Contents

    Table of Contents Disclaimers ..................... ii Safety Precautions ..................iii Chapter 1 Introduction ..........1 General Description ................1 Specifications ..................2 1.2.1 Main CPU Board ..................2 1.2.2 I/O System ....................2 1.2.3 System Specifications ................. 3 Dimensions ..................4 I/O Outlets ....................
  • Page 5 Main Menu ..................30 Advanced Menu ................. 31 3.3.1 NCT6102D Super IO Configuration ............32 3.3.2 Hardware Monitor ..................34 3.3.3 ACPI Settings .................... 35 3.3.4 CPU Configuration ..................36 3.3.5 SATA Configuration ................... 37 3.3.6 USB Configuration..................38 3.3.7 Utility Configuration ...................
  • Page 6 This page is intentionally left blank.

  • Page 7: Chapter 1 Introduction

    Windows 8.x, Windows 10 and Windows embedded OS. This panel computer can house an mSATA for storage and two Mini card slots for wireless connection. Its excellent ID and friendly user interface make it a professional yet easy-to-use panel computer. The MPC152-845 is an ideal for space-limited in medical application.

  • Page 8: Specifications

    One Mini-card slot (mSATA supported as an option)  Storage  One mSATA  One 2.5” SATA HDD  Power connector  MPC152-845-J: 12 VDC with external 65W AC adapter and screw type connector;  MPC152-845-VDC : 9~36 VDC with phoenix power connector Introduction...

  • Page 9: System Specifications

    Power output: 12 VDC, Max. 5.42 A — NOTE All specifications and images are subject to change without notice. NOTE The DC power source to be used with MPC152-845 must be galvanically isolated according to IEC60601-1 safety of medical devices! Introduction...

  • Page 10: Dimensions

    MPC152-845 User’s Manual Dimensions Diagram 1-1 shows the dimensions and outlines of the front panel of the MPC152-845. Diagram 1-1 Front dimensions and outline of the MPC152-845 Diagram 1-2 Cutting-out dimensions of the MPC152-845 Introduction...
  • Page 11 MPC152-845 User’s Manual Diagram 1-3 Dimensions and outline of the six facets the of the MPC152-845 (1) The back side (2) The left and right sides; the top and bottom sides; and the front side Introduction...

  • Page 12: I/O Outlets

    MPC152-845 User’s Manual I/O Outlets lease refer to Figures 1-1 and Table 1-1 for I/O locations at the bottom of the MPC152-845. Figure 1-1 Bottom view of the MPC152-845 Table 1-1 Descriptions of I/O Functions at the bottom of the MPC152-845...
  • Page 13 MPC152-845 User’s Manual Function Function Touch LED indicator HDD & Power LED indicator Touch on/off button Introduction...

  • Page 14: Packing List

    Driver CD x1  Screws for HDD x4  Phoenix connector x 1 (for MPC152-845-DC)  Power Adapter & power cord (for MPC152-845-J) If you can not find the package or any items are missing, please contact Axiomtek distributors immediately. Introduction...

  • Page 15: Hardware And Installation

    MPC152-845 User’s Manual Chapter 2 Hardware and Installation The MPC152-845 provides rich I/O ports and flexible expansions for users to meet different demands. The Section is describing hardware installation, including the following subsections:  Jumper and Connector Settings  Port Definitions ...

  • Page 16: Jumper Settings

    Diagram 2-2 Solder Side of the Board 2.1.1 Jumper Settings Users can make proper jumper settings to configure the board SBC87845 to suit the needs of their applications. Table 2-1 shows the default jumper settings for the MPC152-845. Table 2-1 Default jumper settings Jumper Description Default Settings ★...

  • Page 17: Connector Settings

    MPC152-845 User’s Manual ★ NOTE: shown above is for default setting. 2.1.2 Connector Settings The connectors on the CPU Board allow the CPU Board to connect with other parts of the system. Ensure that all connectors are in place and firmly attached. Table2-2 lists the function of each connector on the Board SBC87845。...
  • Page 18 MPC152-845 User’s Manual LVDS connector: CN2 Table 2-4 CN2 pin assignment Diagram 2-4 CN2 pin mapping Description Description LVDSA_DATAN0 LVDSB_DATAN2 LVDSA_DATAP0 LVDSB_DATAP2 Resolution selection[0] Resolution selection[1] LVDSA_DATAN1 LVDSA_DATAN3 LVDSB_DATAN3 LVDSA_DATAP1 LVDSB_DATAN0 LVDSA_DATAP3 LVDSB_DATAP3 LVDSB_DATAP0 LVDSA_DATAN2 LVDSA_CLKN LVDSB_CLKN LVDSA_DATAP2 LVDSB_DATAN1 LVDSA_CLKP...
  • Page 19 MPC152-845 User’s Manual Full-size PCI-Express Mini Card: CN7 This is a full-size PCI-Express Mini Card connector on the top side complying with PCI-Express Mini Card Spec. V1.2. It supports either PCI-Express or USB 2.0. Signal Signal PCIE_WAKE3_N +3.3V_SBY No use No use +1.5V...
  • Page 20 MPC152-845 User’s Manual DIO connector: CN9 Table 2-7 CN9 pin assignment Diagram 2-7 CN9 pin mapping Description GPIO0 GPIO1 GPIO2 GPIO3 GPIO4 GPIO5 GPIO6 +3.3V GPIO7 Power connector: CN10 Table 2-8 CN10 pin assignment Diagram 2-8 CN10 pin mapping Description...
  • Page 21 MPC152-845 User’s Manual Full-size PCI-Express Mini Card and mSATA Connector: CN11 This is a full-size PCI-Express Mini Card connector on the top side complying with PCI-Express Mini Card Spec. V1.2. It supports either PCI-Express, USB 2.0 or SATA (mSATA). Signal...
  • Page 22 MPC152-845 User’s Manual TOUCH connector: CN13 Table 2-11 CN13 pin assignment Diagram 2-10 CN13 pin mapping Description Sense Lin/Mic In connector: CN16 Table 2-11 CN16 pin assignment Diagram 2-11 CN16 pin mapping Description Description LIN IN R LIN IN L...

  • Page 23: Port Definitions

    MPC152-845 User’s Manual USB2.0 connector: CN19 Table 2-14 CN19 pin assignment Diagram 2-14 CN19 pin mapping Description Description USB- USB- USB+ USB+ +5V Standby Power connector: CN28, CN29 Table 2-15 CN28/ 29 pin assignment Diagram 2-15 CN28/ 29 pin mapping...

  • Page 24: Dio Port

    MPC152-845 User’s Manual 2.2.2 DIO Port A Dub 9 connector is set up as a DIO port on the I/O side of the MPC152-845. Please refer to detailed pin assignment list below in Table 2-17. Table 2-17 COM port pin assignment...

  • Page 25: Mountings - Panel/Wall/Desktop/Vesa

    There are several mounting ways for the MPC152-845, Panel, Wall, Desktop and VESA mountings. 2.4.1 Panel Mounting (Optional) The MPC152-845 is designed for panel mount application. A set of standard mounting kit are bundled with the system package that you can use it to mount the MPC152-845. Step 1 Remove rubbers on panel mount holes.

  • Page 26: Wall-Mounting

    The MPC152-84 is designed for Wall mounting application. Please refer to the following steps: Fix wall mount bracket on the back of the unit. 2.4.3 Desktop-Mounting The MPC152-845 is designed for desktop mounting application. Please refer to the following steps: Step 1 Find out the screws as marked on the back side of chassis.
  • Page 27 MPC152-845 User’s Manual Step 2 Assemble the desktop stand to the chassis, and fix the screws. ： CAUTION USE RECOMMENDED/SUITABLE MOUNTING APPARATUS TO AVOID RISK OF INJURY. Hardware and Installation...

  • Page 28: Vesa-Arm Mounting

    MPC152-845 User’s Manual 2.4.4 VESA-ARM Mounting ： CAUTION USE RECOMMENDED/SUITABLE MOUNTING APPARATUS TO AVOID RISK OF INJURY. Step 1 Find out the screws as marked on the back side of chassis. Step 2 Assemble the VESA-ARM to the back side of the chassis, and fix the screws.

  • Page 29: Hdd Installation

    MPC152-845 User’s Manual HDD Installation 2.4.1 Installing a HDD The MPC152-845 provides a convenient Hard Disk Drive (HDD) bracket for users to install a 2.5” SATA HDD. Please follow the steps: Step 1 Unscrew all screws on the back cover to open the back cover (see Figure 2-1).
  • Page 30 MPC152-845 User’s Manual Step 3 Unscrew the thumbscrew (see Figure 2-3(a) and (b)). Figure 2-3(a) HDD slot (closed) Figure 2-3(b) HDD slot (open)  ： CAUTION If the thickness of a HDD is less than 9.5mm, please add sponges under the HDD.

  • Page 31: Installing A Dram

    2-5). Figure 2-5 Connecting the HDD Slot into the HDD 2.4.2 Installing a DRAM The MPC152-845 provides one 204-pin DDR3L SODIMM socket that supports system memory up to 8GB. Please follow steps below to install a memory module: Step 1 See Figure 2-6;...

  • Page 32: Installing A Wireless Lan Card

    2.4.3 Installing a Wireless LAN Card The MPC152-845 comes with two Mini card slots for users to install wireless LAN cards. Either slot 1 or slot 2 can be used to install a wireless LAN card. Please refer to the following instructions and illustration for the installation of the wireless LAN card.

  • Page 33: Installing A Msata Card

    Figure 2-11 Locating and connecting the antenna cable 2.4.4 Installing a mSATA Card The MPC152-845 comes with one Mini Card slot for users to install mSATA cards. Please choose slot 2 when installing an mSATA card and refer to the following instructions and...

  • Page 34: Power Input (Phoenix Type)

    －:Power negative +: Power positive 2.5.2 AT/ATX mode-selectable switch The MPC152-845 comes with a switch for the selection of the AT/ATX mode. Users can adjust the power mode accordingly with ease. Figure 2-18 Locating the AT/ATX mode-selection switch NOTE: The safety ground must be connected to ensure the unit working appropriately.

  • Page 35: Ami Bios Setup Utility

    MPC152-845 User’s Manual Chapter 3 AMI BIOS Setup Utility This Section provides users with detailed descriptions about how to set up basic system configuration through the AMI BIOS setup utility. Navigation Keys The BIOS setup/utility uses a key-based navigation system called hot keys. Most of the hot keys for the BIOS setup utility can be used at any time during the setup navigation process.

  • Page 36: Main Menu

    MPC152-845 User’s Manual Main Menu Figure 3-1 Main menu System Time/Date Use this option to change the system time and date. Highlight System Time or System Date using the up/ down/ left and right arrow keys (see Figure 3-1).. Enter new values through the keyboard.

  • Page 37: Advanced Menu

    MPC152-845 User’s Manual Advanced Menu Figure 3-2 Advanced Menu The Advanced menu allows users to set configurations of the CPU and other system devices. Select any item on the left to go to the sub-menus (as shown in Figure 3-2).

  • Page 38: Nct6102D Super Io Configuration

    MPC152-845 User’s Manual 3.3.1 NCT6102D Super IO Configuration The ‘NCT6102D Super IO Configuration’ page is to change the value of the Super IO Configuration. The description of the selected item will appear on the right side of the screen (as shown in Figure 3-3). For items marked with “”, please press <Enter> for further options (as shown in Figure 3-4).
  • Page 39 MPC152-845 User’s Manual ► Serial Port 1 (COM1) / Serial Port 2 (COM2) Serial port This option is used to enable or disable serial port COM1/COM2. Device Setting This item specifies the base I/O port address and Interrupt Request (IRQ) address of serial port.

  • Page 40: Hardware Monitor

    MPC152-845 User’s Manual 3.3.2 Hardware Monitor Figure 3-5 shows a screen reflecting the ‘PC Health Status’ of the hardware in real time. Figure 3-5 Entering ‘Hardware Monitor’ AMI BIOS Setup Utility...

  • Page 41: Acpi Settings

    MPC152-845 User’s Manual 3.3.3 ACPI Settings This screen is used to select options of the ACPI Configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen. ACPI Sleep State This item allows users to select the Advanced Configuration and Power Interface (ACPI) state to be used for system suspension.

  • Page 42: Cpu Configuration

    MPC152-845 User’s Manual 3.3.4 CPU Configuration Figure 3-7 shows a page of CPU configuration with item Intel Virtualization Technology highlighted for [Enabled] or [Disabled]. Figure 3-7 Entering ‘CPU Configuration’ AMI BIOS Setup Utility...

  • Page 43: Sata Configuration

    MPC152-845 User’s Manual 3.3.5 SATA Configuration This screen allows users to select options for SATA Configuration, and change the value of the selected option (see Figure 3-8). SATA Controller Highlight this item to set up SATA Controller to be [Enable] or [Disable].

  • Page 44: Usb Configuration

    MPC152-845 User’s Manual 3.3.6 USB Configuration Please see Figure 3-9 to see what items can be set up under the page of USB Configuration. Figure 3-9 Entering ‘USB Configuration’ 3.3.7 Utility Configuration Figure 3-10 shows the page once entering Utility Configuration.

  • Page 45: Pcie/Msata Mini Card Configuration

    MPC152-845 User’s Manual 3.3.8 PCIE/mSATA Mini Card Configuration Figure 3-11 shows the page once entering PCIE/mSATA Mini Card Configuration. There are two options to choose from [PCIE] and [mSATA]. Figure 3-11 Entering ‘PCIE/mSATA Mini Card Configuration’ AMI BIOS Setup Utility...

  • Page 46: Chipset Menu

    MPC152-845 User’s Manual Chipset Menu The Chipset menu gives memory information about the North Bridge and South Bridge (see Figure 3-12). Figure 3-12 Chipset Menu 3.4.1 North Bridge North Bridge memory information is shown in Figure 3-13. Figure 3-13 Entering ‘North Bridge’...

  • Page 47: South Bridge

    MPC152-845 User’s Manual 3.4.2 South Bridge South Bridge TXE information is shown in Figure 3-14. Figure 3-14 Entering ‘South Bridge’ AMI BIOS Setup Utility...

  • Page 48: Security Menu

    MPC152-845 User’s Manual Security Menu Figure 3-15 Security Menu AMI BIOS Setup Utility...

  • Page 49: Boot Menu

    MPC152-845 User’s Manual Boot Menu The Boot menu allows users to change boot options of the system. Users can highlight any of the items on the left frame of the screen to go to any particular sub menus (as shown in Figure 3-16).

  • Page 50: Save & Exit Menu

    MPC152-845 User’s Manual Save & Exit Menu Figure 3-17 Save & Exit Menu AMI BIOS Setup Utility...

  • Page 51: Chapter 4 Drivers Installation

    MPC152-845 User’s Manual Chapter 4 Drivers Installation System MPC102-845 supports Windows 7, Windows 8/8.1 ,WES 7 and WE8S. To facilitate the installation of system driver, please carefully read the instructions in this chapter before start installing. 4.1.1 Win 7 Insert Driver CD and select the “\Drivers”.

  • Page 52: Win 8/8.X

    MPC152-845 User’s Manual 4.1.2 Win 8/8.x Insert Driver CD and select the “\Drivers”. Select all files and follow the installing procedure. 4.1.3 Win 10 Insert the Driver disc included in the Packing List and select the “\Drivers”. Locate the Win 10 directory first (if Win 10 is user’s choice).

  • Page 53: Touch Screen

    MPC152-845 User’s Manual Under directory Win 10, there are more file folders as shown below. Select all files and follow the installing procedure from Steps 1 to 7 Touch Screen The MPC102-845 uses the 5-wire analog resistive. There are the specification and driver installation which are listed below.

  • Page 54: Driver Installation- Windows 7/8.X

    MPC152-845 User’s Manual 4.2.2 Driver Installation- Windows 7/8.x/10 The MPC102-845 provides a touch screen driver that users can install it under the operating system Windows 7/8.x. To facilitate installation of the touch screen driver, you should read the instructions in this chapter carefully before you attempt installation.
  • Page 55 MPC152-845 User’s Manual Select the “Standard Calibrate” tab. Calibration: To adjust the display with touch panel, click “Calibration” and follow the calibrate point to do calibration; there are five points on screen for calibration. Press OK. Drivers Installation...

  • Page 56: Embedded O.s

    MPC152-845 User’s Manual Embedded O.S. The MPC102-845 provides the WES 7 and WE8S Embedded. The O.S. is supported devices which are listed below. 4.3.1 WES 7 & WE8S & Win 10 IoT. Here are supported onboard devices: Onboard Multi I/O ...