Table of Contents
Advertisement
MAX/Wall
Technical Wall System
®
1.3
Assembly Guidelines
Support Restrictions (Cont.)
6. A single cantilevered work surface attached to a
wall frame must be supported as shown in Figure
1-8.
Figure 1-8
8
Support at
both ends
7. When two cantilevered work surfaces are next to
each other but at different heights, the higher of
the two work surfaces must be supported at that
juncture. See Figure 1-9.
8. Adjustable support legs cannot be attached to
corner tables.
9. Take ceiling height into consideration when using
a corner post as a direct power entry source.
Power pole height is six-feet. Add lengths of cor-
ner post and power pole together for maximum
height available.
Support for
Higher Table
Figure 1-9
Advertisement
Table of Contents
