Table of Contents
Advertisement
MAX/Wall
Technical Wall System
®
Section 3 – Installing Wall Frames
3.8
Corner Filler – Two-Way
Tools Required:
9/16" Wrench
Hardware Included:
8
HHCS, 3/8-16 x 2-1/2" Grade 5
8
Nuts, 3/8-16
16
Washers
Procedure:
Refer to Figure 3-14:
Figure 3-14 Corner Filler – Two-Way
1. Loosely assemble to one of the wall frame
uprights using the appropriate length of 3/8" bolts.
2. Position the second wall frame 90 degrees to the
first wall frame and loosely assemble it to the
brackets using the appropriate length of 3/8"
bolts.
3. Align and level the two wall frames checking that
they are square and tighten all 3/8" bolts.
24
Wall Frame
Bracket
3/8" Washer
3/8" Bolt
Wall Frame
Bracket
3/8" Nut
3/8" Washer
3/8" Bolt
3/8" Nut
Advertisement
Table of Contents
