Table of Contents
Advertisement
Section 4 – Installing Supporting Furniture and Casework
4.3
Cantilever Corner Work Surface
o
(90
) to Wall Frame
8. Insert the support rail onto the corner brackets.
Loosely thread the four 1/4-20 x 1/2" HHCS
into the corner brackets. See the exploded diagram.
9. Loosely install the front rail to both outside
cantilevered legs using four 10 x 5/8" PPHSMS.
10. Place the work surface onto the cantilevered
legs, allowing a 3/4" gap between the wall
frames and top. Position the ends of the top so
they are flush with the sides of the cantilevered
legs or adjacent work surfaces.
11. Center and tighten the front and support rails.
(cont.)
Cantilever
Legs
1/4-20 x 1/2" HHCS
MAX/Wall
Technical Wall System
®
Wall Frame
Corner Top
Support
10 x 5/8"
Support
PPHSMS
Rail
Front
Rail
C-Channel
Figure 4-7 Attaching Corner Cantilever Frame
Wall Frame
Corner Bracket
39
Advertisement
Table of Contents
