MAX/Wall
Technical Wall System
®
Section 3 – Installing Wall Frames
3.10 Service Chase
Tools Required:
Phillips screwdriver
3/8" Wrench
Electric drill and 5/32" bit
Jigsaw with metal cutting blade
Hardware Included:
8
No. 10 x 5/8" PPHSMS
Procedure:
1. Determine where the service chase is to be
located within the wall frame.
2. Fasten the end panels to the reagent top and the
underside of the top rail. Also fasten the end
panel to the top of the rail and up through the
ceiling tile.
3. make the necessary cutouts in the reagent top
and the top frame rail for the electrical and other
services.
4. Attach the cover panels.
Position Anywhere
Within Opening
28
Cover
Cover
No Reagent Shelf
Figure 3-19 Service Chase
End Panel
Service Columns
Reagent Shelf Included
No. 10 x 5/8"
Sheet Metal Screws
Dual Lock Fasteners
Cover
Cover