Inner Shelves To The Wall Frame - Thermo Scientific FISHER HAMILTON MAX/WALL Installation Manual

MAX/Wall Technical Wall System
®
Section 4 – Installing Supporting Furniture and Casework
4.8 Inner Shelves to Wall
Frame
Tools Required:
Rubber mallet
Phillips head screwdriver with No. 2
and 3 tips
Refer to Figure 4-16.
1. Attach the right hand and left hand shelf
brackets to the shelf using No. 10-24 x
1/2" PPHMS.
2. If shelf lips are supplied, attach the lips
using No. 10 x 5/8" PPHSMS to the
front and/or back edge of the shelf.
3. Insert the hooks on the shelf brackets
into the slots in the riser of the wall
frame. Shelf height is adjustable by
inserting hooks into different slots. The
slots are spaced at 1" increments
4. To properly engage the hooks, strike the
shelf brackets in a downward direction
using a rubber mallet.
46
Shelf
Shelf Lip
10-24 x 1/2" PPHMS
Figure 4-16 Assembling Inner Shelf
Shelf Bracket
10 x 5/8"
PPHSMS
Riser
Extrusion