Section 4 - Installing Supporting Furniture And Casework; Vertical Utility Service Raceway - Thermo Scientific FISHER HAMILTON MAX/WALL Installation Manual

MAX/Wall Technical Wall System
®
Section 4 – Installing Supporting Furniture and Casework
4.1 Vertical Utility Service
Raceway
Tools Required:
Phillips screwdriver
Electric drill with 7/32" bit
Hardware Included:
4 Plug Buttons
4 10-24 x 1/2" Screws
Procedure:
1. Fasten the vertical utility service raceway to the
riser using the four 10-24 x 1/2" screws as
shown.
2. Cover the holes with the plug buttons provided.
Note: Electrical/data outlets and cover
plates are ordered separately and field
installed.
34
Vertical
Raceway
No. 10-24 x
1/2" Screws
Plug Button
Top
Figure 4-1 Vertical Raceway
Riser Upright