Table of Contents
Advertisement
Section 4 – Installing Supporting Furniture and Casework
4.12 Installing Suspended
Cabinets
Tools Required:
Phillips head screwdriver with No. 2 and 3 tips
3/4" and 7/16" Combination wrench or socket set
with 7/16" socket
Hardware Included:
Hardware Bag No. 684435 consisting of:
Upper front clamps
Upper rear brackets
1/4-20 x 2" carriage bolts
1/4-20 x 3/4" carriage bolts
1/4-20 Hex nuts
Bottom clips
1/4-20 x 1" PPHMS
Refer to Figure 4-28
1. Remove drawers from the suspended cabinet.
2. Insert the 1/4-20 x 3/4" carriage bolts into
the rear brackets of the suspended cabinet,
apply the 1/4-20 hex nuts and hand tighten.
3. Slide the rear brackets of the suspended
cabinet onto the rear support channel or
the "C" channel of the work surface frame.
See the exploded view.
MAX/Wall
2"
Suspended Cabinet
Rear
Support
Rear Bracket
Channel
1/4-20 x 3/4" Carriage Bolt
Figure 4-28 Attaching Rear Top Bracket
Technical Wall System
®
.063
Suspended
Cabinet
53
Advertisement
Table of Contents
