Table of Contents
Advertisement
Section 4 – Installing Supporting Furniture and Casework
4.7
General Purpose Shelves
Tools Required:
Rubber mallet
Phillips head screwdriver with No. 2 and 3 tips
Refer to Figure 4-15.
1. Attach the right hand and left hand shelf brackets
to the shelf using No. 10-24 x 1/2" PPHMS.
2. If shelf lips are supplied, attach the lips using No.
10 x 5/8" PPHSMS to the front and/or back edge
of the shelf.
3. Insert the hooks on the shelf brackets into the
slots in the uprights of the wall frame.
4. To properly engage the hooks, strike the shelf
brackets in a downward direction using a rubber
mallet.
Shelf Lip
10 x 5/8" PPHSMS
Figure 4-15 Attaching General Purpose Shelves
MAX/Wall
Technical Wall System
®
Riser Extrusion
Shelf
Shelf Bracket
10-24 x 1/2" PPHMS
45
Advertisement
Table of Contents
