Table of Contents
Advertisement
1.3
Assembly Guidelines
Support Restrictions (Cont.)
3. End supports are defined as any of the following
items which add stability to a single run of wall
frames: structural table, 24" or 30" wide wall
frames, or support leg. See Figures 1-5, 1-6 and
1-7.
4. Shelves, closed cabinets, and cantilevered work
surfaces may only be attached to the supported
side of a wall frame or run of wall frames. See
dotted lines in Figure 1-5.
5. Cantilevered work surfaces and/or tables of
similar height may be bolted together at the front
edge for improved rigidity.
8'
Figure 1-6
Closed Cabinet
Unsupported side
Supported side
Figure 1-5
24"
or
30"
MAX/Wall
Technical Wall System
®
8'
Cantilevered
Work Surface
Cantilevered Table Frame
8'
Support Leg at One End
Figure 1-7
Shelf
Base Cabinet
Filler
24"
or
30"
7
Advertisement
Table of Contents
