Step.2:.Assembling.the.printer.unit.and.the.stand; Step 2: Assembling The Printer Unit And The Stand - Roland TrueVIS VG2-640 Setup Manual

1. Assembly and Ink Filling

Step 2: Assembling the Printer Unit and the Stand

Import ant
If you will not use the lifting bars, proceed to
situation, be sure to perform the work with eight or more people.
1.
Attach the lifting bars to the printer unit.
ME MO
• The lifting bars and the lifting bar fixing bolts are not included with the printer. The worker per-
forming the installation will bring them to the work area.
• Attach the lifting bars with the printer unit in the packing box.
State after attaching the lifting bars
Temporarily tighten the lifting bar fixing bolts (4 locations in total) on the bottom sur-
A
face of the printer unit.
There are 4 screw holes on each side of the bottom surface. Use the 2 inner holes on each
side. Tighten the lifting bar fixing bolts until you can see approximately 10 mm (0.4 in.) of their
threads.
30
2.Installation
P. 32 "2. Fix the printer unit to the stand."
About 10 mm
(0.4 in.)
. However, in that
Tighten
temporarily
Lifting bar fixing
bolts: 4