Remote Command Response Frame 0X97 - Digi XTend vB DigiMesh XTP9B-DPM-001 User Manual

Frame fields
Digi Manufacturer ID
Digi DD value
(optional)
RSSI (optional)
Checksum

Remote Command Response frame 0x97

Description
If a device receives this frame in response to a Remote Command Request (0x17) frame, the device sends
an AT Command Response (0x97) frame out the UART.
Some commands, such as the ND command, may send back multiple frames.
Format
The following table provides the contents of the frame. For details on frame structure, see
specifications on page
Frame fields
Frame type
Frame ID
64-bit source (remote) address
XTend vB DigiMesh RF Module User Guide
Offset Example
33 0x10
34 0x1E
35 0x00
36 0x0C
37 0x00
38 0x00
39 0x2E
40 0x33
60.
Byte Description
4 0x97
5 This is the same value that is passed in to the request.
6-13 The address of the remote device returning this response.
API frames
API frame
105