Remote At Command Request Frame 0X17 - Digi XTend vB DigiMesh XTP9B-DPM-001 User Manual

Frame fields
Cluster ID
Profile ID
Broadcast radius
Transmit options
Data payload
Checksum

Remote AT Command Request frame 0x17

Description
Used to query or set device parameters on a remote device. For parameter changes on the remote device
to take effect, you must apply changes, either by setting the apply changes options bit, or by sending an
AC command to the remote.
Format
The following table provides the contents of the frame. For details on frame structure, see
specifications on page
XTend vB DigiMesh RF Module User Guide
Offset Example
17 0x00
18 0x11
19 0xC1
20 0x05
21 0x00
22 0x00
23 0x54
24 0x78
25 0x44
26 0x61
27 0x74
28 0x61
29 0xA6
60.
API frames
API frame
78