Remote Command Response Frame - 0X97 - Digi XBee 868LP User Manual

Operate in API mode

Remote Command Response frame - 0x97

Description
If a device receives this frame in response to a Remote Command Request (0x17) frame, the device
sends an AT Command Response (0x97) frame out the serial interface.
Some commands, such as the ND command, may send back multiple frames. For details on the
behavior of ND, see
Format
The following table provides the contents of the frame. For details on frame structure, see
format.
Frame data
fields
Frame type
Frame ID
64-bit source
(remote)
address
Reserved
AT commands
Command
status
Command data
Example
If a device sends a remote command to a remote device with 64-bit address 0x0013A200 40522BAA to
query the SL command, and if the frame ID = 0x55, the response would look like the following
example.
Frame data fields
Start delimiter
XBee 868LP RF Modules User Guide
ND (Network Discover).
Offset Description
3 0x97
This is the same value passed in to the request. If Frame ID = 0 in the
4
associated request frame the device does not deliver a response frame.
5-12 The address of the remote device returning this response.
Reserved.
13-14
The name of the command.
15-16
0 = OK
17
1 = ERROR
2 = Invalid Command
3 = Invalid Parameter
4 = No response
The most significant nibble is a bit field as follows:
0x40 = The RSSI field is invalid and should be ignored.
0x80 = Response is a remote command
18-n The value of the requested register.
Offset Example
0 0x7E
Frame data
API frame
203