Dl (Destination Address Low); Ni (Node Identifier); Network Discovery Options) - Digi XTend vB DigiMesh XTP9B-DPM-001 User Manual

DL (Destination Address Low)

Set or read the lower 32 bits of the 64-bit destination address. When you combine DL with DH, it defines
the destination address that the device uses for transmissions in Transparent mode.
0x000000000000FFFF is the broadcast address.
Parameter range
0 - 0xFFFFFFFF
Default
0xFFFF

NI (Node Identifier)

Stores the node identifier string for a device. This can be up to 20 ASCII characters.
The string only accepts printable ASCII data in Command mode.
The string cannot start with a space.
Use a carriage return or comma to end the command.
The command automatically ends when you enter the maximum bytes for the string.
Parameter range
Up to 20-byte ASCII string
Default
0x20 (an ASCII space character)
NO (Network Discovery Options)
Set or read the network discovery options value for the ND command on a particular device. The options
bit field value changes the behavior of the ND command and/or changes:
What optional values the device returns when it receives an ND command or API Node
l
Identification Indicator (0x95) frame.
Parameter range
0x0 - 0x7 (bit field)
XTend vB DigiMesh RF Module User Guide
Addressing commands
35