Table of Contents
Advertisement
Frame descriptions
Remote Command Response frame - 0x97
Description
If a device receives this frame in response to a Remote Command Request (0x17) frame, the device
sends an AT Command Response (0x97) frame out the serial interface.
Some commands, such as the ND command, may send back multiple frames. For details on the
behavior of ND, see
Format
The following table provides the contents of the frame. For details on frame structure, see
format.
Frame data fields
Frame type
Frame ID
64-bit source (remote)
address
16-bit source (remote)
address
AT commands
Command status
Command data
Digi XBee3® 802.15.4 RF Module User Guide
ND
command.
Offset Description
3
0x97
This is the same value that is passed into the request.
4
The request is a 0x17 frame.
5-12
The long address of the remote device returning this
response.
13 -
The short address of the remote device returning this
14
response.
The name of the command.
15-16
0 = OK
17
1 = ERROR
2 = Invalid Command
3 = Invalid Parameter
4 = Remote Command Transmission Failed
18-n
The value of the requested register in hexadecimal notation
(non-ASCII).
Remote Command Response frame - 0x97
API frame
164
Advertisement
Table of Contents
