Install The Tank Hose - Raven SmarTrax Installation Manual

Excess Flow Hose Installed
FIGURE 11.
Install a -8 ORFS M/F 90° swivel elbow fitting (P/N 333-0012-067) on the end of the machine's steel
11.
pressure line.
Install the male end of the supplied hydraulic hose (P/N 214-1000-927) on the installed elbow fitting.
12.
Connect the 90° end of the installed hydraulic hose to the fitting installed in Port EF of the SmarTrax valve.
13.

Install the Tank Hose

Note:
Loosely install the connections to the SmarTrax valve. Do not tighten the connections until
instructed to do so.
Tank Line on the Steering Orbital
FIGURE 12.
Locate and disconnect the tank line from the steering orbital.
1.
Manual No. 016-5034-012 Rev. A
Hydraulic System Installation
17