Raven SmarTrax Installation Manual page 24

Chapter 3
Right Pressure Hose Installed
FIGURE 17.
Install a -6 ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-069) in the open port of the steering
4.
orbital.
Install the 90° end of the supplied hydraulic hose (P/N 214-1000-928) on the opposite end of the installed
5.
tee fitting.
Route the straight end of the installed hydraulic hose along the right side of the machine to the right steering
6.
cylinder.
Right Steering Hose Assembly
FIGURE 18.
Install a -6 ORFS M/F 90° elbow fitting (P/N 333-0012-065) on the end of the installed hydraulic hose.
7.
Install a -6 ORFS M/M union adapter fitting (P/N 333-0012-033) on the end of the installed elbow fitting.
8.
Install a -6 ORFS F/F union adapter fitting (P/N 333-0012-145) on the end of the installed male union fitting.
9.
Connect the hose assembly to the open steering cylinder port.
10.
Install the straight end of the supplied hydraulic hose (P/N 214-1000-924) on the 90° end of the tee fitting
11.
installed in the steering orbital.
Connect the 90° end of the installed hydraulic hose to the fitting installed in Port A of the SmarTrax valve
12.
(P/N 334-0003-090).
20 John Deere 1204 SmarTrax™ Installation Manual