Raven SmarTrax Installation Manual page 25

Machine's Left Steering Hose on Steering Orbital
FIGURE 19.
Locate and disconnect the machine's existing left steering hose from the top-right port of the steering
13.
orbital.
Left Steering Hose Installed
FIGURE 20.
Install a -6 ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-069) in the open port of the steering
14.
orbital.
Connect the machine's left steering hose to the opposite end of the installed tee fitting.
15.
Install the straight end of the supplied hydraulic hose (P/N 214-1000-924) on the 90° end of the installed tee
16.
fitting.
Connect the 90° end of the installed hose to the fitting installed in Port B of the SmarTrax valve.
17.
Manual No. 016-5034-012 Rev. A
Hydraulic System Installation
21