Raven SmarTrax Installation Manual page 36
John deere 1204
Hide thumbs
Also See for SmarTrax:
- Calibration and operation manual (156 pages) ,
- Operation manual (73 pages) ,
- Installation manual (59 pages)
Table of Contents
Advertisement
Chapter 5
Valve Harness Connections
FIGURE 6.
TRANSDUCER
Connection
Connect the VALVE connector to the open PVE port of the SmarTrax valve.
3.
Connect the TRANSDUCER connector to the pressure transducer (P/N 422-0000-086) installed in Port PS
4.
of the SmarTrax valve.
Route and connect the WAS connector to the cable of the installed WAS (P/N 063-0181-017).
5.
Secure excess cable with plastic cable ties.
6.
32
John Deere 1204 SmarTrax™ Installation Manual
PVE Connection
Advertisement
Table of Contents
