FIGURE 5. Pressure Hose Installed
3. Install a -6 ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-069) on the steel pressure line.
4. Connect the machine's pressure hose to the opposite end of the installed tee fitting.
5. Install the 90° end of the supplied hydraulic hose (P/N 214-1000-657) on the 90° end of the installed tee fitting.
6. Connect the straight end of the installed hydraulic hose to Port P of the SmarTrax valve.
INSTALL THE TANK HOSE
1. Locate the machine's steel tank line.
NOTE:
The pressure line runs on the inside of the frame from the rear of the machine. Trace it to the T port
on the steering orbital if necessary.
2. Disconnect the machine's tank hose from the steel tank line.
FIGURE 6. Tank Hose Installed
3. Install a -8 ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-028) on the machine's steel tank line.
4. Connect the machine's tank hose to the opposite end of the installed tee fitting.
5. Install the -8 end of the supplied hydraulic hose (P/N 214-1000-658) on the 90° end of the installed tee fitting.
6. Connect the other end of the installed hydraulic hose to Port T of the SmarTrax valve.
P/N 016-5032-043 Rev. A
Hydraulic System Installation:
15