Pressure Hose - Raven SmarTrax Supplement Installation Manual

Nitro 2200 SmarTrax Installation Manual
8

Pressure Hose

1. Identify the pressure port on the tractor steering orbital. Hoses may
need to be traced to the hydraulic pump for proper identification. Once
the port has been identified, remove the hose from the steering orbital
and install on the appropriate tee fitting, found in the Raven adapter kit, to
the steering orbital. Once the tee fitting is installed, reattach the original
hose.
2. Attach hose (P/N 214-1000-202) to the P-Port on the Raven steering
control valve, route to and attach to the open branch on the installed tee
fitting using a 90° fitting.
3. An additional 45° or 90° elbow may be installed on the Raven valve to
help hose routing. These elbows will be found in the hydraulic fitting kit.