HOSE CONNECTIONS AND ROUTING
Pressure Hose
Remove the existing pump to orbital hose and attach it to the "P" port on the steering assist valve. It
may be necessary to use the provided 90-degree 3/4" JIC elbow fittings to ensure the hoses are
routed properly.
Excess Flow Hose
Attach a 90-degree elbow adapter fitting to the "EF" port on the steering assist valve and connect one
end of the Excess Flow hose to the fitting. Connect the remaining open end of the Excess Flow hose
to the pressure port on the steering orbital. It may be necessary to use the provided 90-degree 3/4"
JIC elbow fittings to ensure the hoses are routed properly.
Tank Port Hose
Remove the existing tank to orbital hose at the orbital and attach a provided 3/4" tee fitting to the
orbital. Re-connect the hose to the tee fitting. Install a 3/4" JIC tee fitting to the "T" port on the
steering assist valve. Connect one end of the tank hose to this tee and the other end to the remaining
open port of the tee on the orbital.
6