Connect The Pressure Override Switch - Raven SmarTrax Installation Manual
Ag-chem rogator 854 (1998 & newer)
Hide thumbs
Also See for SmarTrax:
- Calibration and operation manual (156 pages) ,
- Operation manual (73 pages) ,
- Installation manual (59 pages)
Table of Contents
Advertisement
Chapter 5
Solenoid Connections on the SmarTrax Valve
FIGURE 1.
SmarTrax Valve
Solenoid Connections
Connect the Pressure Override Switch
On the console cable harness (P/N 115-0171-775), identify the connector labeled 'OVERRIDE.'
1.
Connect that 'OVERRIDE' connector to the pressure override switch.
2.
Tighten the screw on the connector to secure the solenoid connection.
3.
Pressure Override Switch Connection
FIGURE 2.
Pressure Switch
Connector
18
RoGator 854 ('98 & Newer) SmarTrax™ Installation Manual
Advertisement
Table of Contents
