Mounting The Smartrax Hydraulic Valve; Mount The Smartrax Hydraulic Valve - Raven SmarTrax Installation Manual

CHAPTER
3

Mount the SmarTrax Hydraulic Valve

Attach the hydraulic mounting plate (P/N 107-0171-578) to the valve mounting bracket (P/N 116-0159-527)
1.
using four 3/8" x 1/2" bolts (P/N 311-0054-105), four 3/8" split lock washers (P/N 313-1000-022), four 3/8"
flat washers (P/N 313-2300-013), and four 3/8" hex nuts (P/N 312-1001-037).
Locate the predrilled holes on the inside framework toward the front of the fuel tank underneath the machine
2.
cab. Match the predrilled holes with the hole pattern in the mounting plate.
Secure the plate to the machine framework using two 3/8" x 1-1/4" bolts (P/N 311-0054-106), two 3/8" split
3.
lock washers (P/N 313-1000-022), two flat washers (P/N 313-2300-013), and two 3/8" hex bolts (P/N 312-
1001-037).
Place the SmarTrax hydraulic valve (P/N 334-0003-064) on the mounting plate and secure using four 5/16"
4.
x 7/8" bolts (P/N 311-0052-104) and four 5/16" split lock washers (P/N 313-1000-019).
SmarTrax Valve Mounting Location
FIGURE 1.
SmarTrax Hydraulic
valve mounting location
Note:
The SmarTrax hydraulic valve supplied with your kit may be different in appearance. The images
provided are for example only. Be sure to follow the procedures to ensure proper installation of
your SmarTrax system.
Manual No. 016-0190-014
M ounting the
C h a p t e r 3
SmarTrax Hydraulic
Valve
Left, Front Tire
9