Power Connection And Fuses - Agilent Technologies XY Operator's Manual

N O T E
1 Locate the accessory package containing the fuse drawer appropriate for your
2 Locate the accessory package containing the 2.0 A fuses.
3 Install the fuse(s) into the fuse drawer. The fuse drawer for 100/120 V accepts
4 Insert the fuse drawer into its receptacle in the XY autosampler. See Figure 21
Figure 3
Installation

Power Connection and Fuses

Power Connection and Fuses
Fuses
Your XY autosampler operates at a line voltage of 110–120 V or 220–240 V
with a line frequency of 60 Hz or 50 Hz respectively.
You receive the XY autosampler without any fuses installed.
To install the fuses:
line voltage. Discard the other fuse drawer.
one fuse. The fuse drawer for 220/240 V accepts two fuses.
on page 54.
Fuse Drawers
Post
Fuse
Fuse installation for 100/120 voltage
Fuse
Fuse
Fuse installation for 220240voltage
17