Setting Up The Communication Interface - Agilent Technologies XY Operator's Manual

1 Start your PC, which must have either WIN NT 4.0 or WIN 95 operating system
2 Start Windows Explorer of your operating system and go to the
3 Under C:\HPCHEM\UVEXE double-click on the appropriate *.reg file to
Table 2
Installation

Setting up the Communication Interface

Setting up the Communication Interface
Setting up the RS-232 Interface
The RS-232 port is used to transfer information between the XY autosampler
and a computer.
RS 232 Interface of your PC
Prior to controlling the XY autosampler by the UV-visible ChemStation
software, you have to update the registry file of your operating system.
The following installation procedure describes how you update your registry
file for a WIN NT 4.0 or WIN 95 operating system:
loaded.
C:\HPCHEM\UVEXE directory.
update the registry file of your operating system. How you identify the
appropriate *.reg file is shown in Table 2.
List of *.reg Files to Update the Registry File of your Operating System
RS 232 (Port 1)
RS 232 (Port 2)
3 Reboot you PC.
RS 232 Interface of the XY Autosampler
For the physical location of the sampler's RS-232 port, refer to Figure 15 on
page 31.
30
WIN NT 4.0
com1_nt.reg
com2_nt.reg
WIN 95
com1_95.reg
com2_95.reg