Unpacking The Xy Autosampler - Agilent Technologies XY Operator's Manual

Installation

Unpacking the XY Autosampler

Unpacking the XY Autosampler
The XY autosampler is shipped with all major components already assembled
except for auxiliary parts such as the vertical arm, needle, tray, racks, etc.
Keep the original container and packing assembly in case the XY autosampler
must be returned.
Standard Equipment
Once the XY autosampler and accessories are unpacked, you should have the
following:
• XY autosampler with certificate
• User Manual
• Fuse drawers 220V/240 V and 110V/120 V
• Fuses (2 A)
• Power cords
• Terminal block connectors
• Vertical arm (Z-drive 123 mm) and screws for vertical arm (Z-drive)
• Needle (123 mm)
• 3 feet of 7 mm id Tygon tubing.
• Support bar assembly
• RS232 cable
• XL wash station
• Open wash cylinder
• Holder guide kit (1.5 mm probe)
• 223 generic black pan with drain assembly
• 223 tray spacer
• Four code 21 racks
• Safety shield with screws
15